Contact
Réf. OB260826135310
92290 Châtenay-malabry
https://www.ouvrierbtp.com/cv-candidat/260826135310/embedded-software-engineer Female Châtenay-malabry Ile de France France 92290 Châtenay-malabry
92290 Châtenay-malabry
https://www.ouvrierbtp.com/cv-candidat/260826135310/embedded-software-engineer Female Châtenay-malabry Ile de France France 92290 Châtenay-malabry
Langues
English
French
Malayalam
French
Malayalam
Ma recherche
Je recherche tout type de contrat, sur toute la région Ile de France, dans le Batiment.
Formations
12/2025 : Bac +5
MSc in Automotive Embedded Systems Embedded Systems, Embedded C, CAN & RTOS, Functional Safety (ISO 26262), ADAS, LabVIEW, Project Management.
MSc in Automotive Embedded Systems Embedded Systems, Embedded C, CAN & RTOS, Functional Safety (ISO 26262), ADAS, LabVIEW, Project Management.
12/2022 : Bac +5
B.Tech Electronics & Communication Engineering Microcontrollers, Sensors, VLSI, Analog & Digital Communication, Semiconductors, FPGA & Electronics.
B.Tech Electronics & Communication Engineering Microcontrollers, Sensors, VLSI, Analog & Digital Communication, Semiconductors, FPGA & Electronics.
Expériences professionnelles
04/2025 - 03/2026 : Embedded Software Engineer chez Claas Tractor Sas, Vélizy‑villacoublay
Delivered large‑scale ECU platform migration from Fujitsu MB90F342 to NXP S32 MCU, implemented watchdog and safe‑state architectures, configured and validated MCAL‑level peripheral drivers (CAN/J1939, PWM, DIO, GPIO), diagnosed hardware‑software integration faults, validated diagnostic services (UDS, KWP2000) with Vector CANoe/CANdela, executed HIL validation campaigns, performed ECU flashing and calibration using internal tooling and LabVIEW test benches.
Delivered large‑scale ECU platform migration from Fujitsu MB90F342 to NXP S32 MCU, implemented watchdog and safe‑state architectures, configured and validated MCAL‑level peripheral drivers (CAN/J1939, PWM, DIO, GPIO), diagnosed hardware‑software integration faults, validated diagnostic services (UDS, KWP2000) with Vector CANoe/CANdela, executed HIL validation campaigns, performed ECU flashing and calibration using internal tooling and LabVIEW test benches.
09/2024 - 02/2025 : Embedded S/W Development and Testing Intern chez Claas Tractor Sas, Vélizy‑villacoublay
Built Python automation tool for Azure DevOps REST APIs, created language generator for ISOBUS device descriptor, designed and bench‑validated STM32‑based PWM control circuit for tractor PTO valve actuation.
Built Python automation tool for Azure DevOps REST APIs, created language generator for ISOBUS device descriptor, designed and bench‑validated STM32‑based PWM control circuit for tractor PTO valve actuation.
Langues
English
French
Malayalam
French
Malayalam
Atouts et compétences
C, C++, Embedded C, Python, NXP S32K142/144 (ARM Cortex‑M4F), STM32 (ARM Cortex‑M4), Raspberry Pi, MCP2515 CAN, MB90F342, ESP32, Bare‑metal (ARM Cortex‑M4F), Real‑Time Embedded Systems, Embedded Linux, CAN, MISRA C, J1939, UDS (ISO 14229), KWP2000 (ISO 14230), SPI, I2C, UART, CANopen, JTAG/SWD, PicoScope, GDB, Oscilloscope, Vector CANoe/CANdela/CANalyzer, S32DS, STM32CubeIDE, Softune IDE, Keil, MATLAB/Simulink, Git, Azure DevOps, LabVIEW, Keil MDK, V‑Cycle, HIL Validation, Agile, AUTOSAR Classic MCAL, Peripheral driver configuration, PWM/DIO/GPIO control, MOSFET driver design, Sensor/actuator integration
