Retour à la CVthèque
Obtenir coordonnées
Electronics & embedded systems engineer – seeking work‑study program
3 à 5 ans d'expérienceContact
Réf. OB260303154505
18000 Bourges
https://www.ouvrierbtp.com/cv-candidat/260303154505/electronics-et-embedded-systems-engineer-seeking-workâ€-study-program Male Bourges Toute la France France 18000 Bourges
18000 Bourges
https://www.ouvrierbtp.com/cv-candidat/260303154505/electronics-et-embedded-systems-engineer-seeking-workâ€-study-program Male Bourges Toute la France France 18000 Bourges
Langues
Français
Anglais
Arabe
Espagnol
Anglais
Arabe
Espagnol
Ma recherche
Je recherche tout type de contrat, dans toute la France, dans le Batiment.
Formations
09/2027 : Bac +5
Engineering Degree in Industrial Risk Management – Advanced Systems
Engineering Degree in Industrial Risk Management – Advanced Systems
09/2026 : Bac +5
Diplôme d'ingénieur en Électronique et Systèmes Embarqués
Diplôme d'ingénieur en Électronique et Systèmes Embarqués
Expériences professionnelles
04/2026 - 09/2026 : Electronics Reliability Engineering Assistant chez Ascorel, Lyon
Developed a Python (PySide6) supervision application for an industrial weighing machine, integrated CAN communication, diagnosed sensor‑supervision sync faults, performed functional analysis and FMECA using the FIDES method.
Developed a Python (PySide6) supervision application for an industrial weighing machine, integrated CAN communication, diagnosed sensor‑supervision sync faults, performed functional analysis and FMECA using the FIDES method.
02/2025 - 02/2025 : Secure LIDAR Tracking System on STM32 – Project chez Insa Centre Val De Loire, Bourges
Sized onboard power chain, designed power & control electronics, characterised measurement chain with VNA and validated dynamic behaviour via LTSpice/MATLAB.
Sized onboard power chain, designed power & control electronics, characterised measurement chain with VNA and validated dynamic behaviour via LTSpice/MATLAB.
05/2024 - 09/2024 : Assistant Engineer – Embedded Control Systems (Cruise Control) chez Lear Corporation, Rabat
Designed firmware architecture for a PIC16F818 in assembly, performed PCB design with MBSE, defined test and validation procedures complying with ISO 26262 safety requirements.
Designed firmware architecture for a PIC16F818 in assembly, performed PCB design with MBSE, defined test and validation procedures complying with ISO 26262 safety requirements.
05/2023 - 09/2023 : Assistant Engineer – Reliability Study of an Electronic System chez Abb‑electrification, Tanger
Acquired and processed sensor signals on Raspberry Pi/ARM, wrote maintenance procedures for auxiliary equipment, calculated MTBF and failure‑rate indicators.
Acquired and processed sensor signals on Raspberry Pi/ARM, wrote maintenance procedures for auxiliary equipment, calculated MTBF and failure‑rate indicators.
06/2022 - 09/2022 : Ingénieur assistant – Hardware & Régulation industrielle chez Redal, Rabat
Designed PCB for a circuit‑breaker control board, developed sequential logic (Grafcet) and low‑level drivers, integrated reliability analysis and failure‑rate modelling.
Designed PCB for a circuit‑breaker control board, developed sequential logic (Grafcet) and low‑level drivers, integrated reliability analysis and failure‑rate modelling.
Langues
Français
Anglais
Arabe
Espagnol
Anglais
Arabe
Espagnol
Atouts et compétences
C, C++, Python, Rust, LADDER, R, Java, VBA, RTOS, VHDL, Verilog, Altium Designer, TIA Portal, LTSpice, AutoCAD, SysML (Modelio), ProteusVSM, SCADA, MATLAB, PSCAD, ETAP, Packet Tracer, GitLab, Power BI, Arduino, ESP32, Raspberry Pi, PIC 8/16, STM32, ARM, HAZOP, AMDEC, APR, Arbres de défaillance, Analyse fonctionnelle, Analyse de fiabilité (MTBF, R(t)), FIDES 2022, DOE, EN 50126 / EN 50128 / EN 50129, ISO 9001, IEC 62380 / IEC 61508, ISO 14001, ISO 45001, Formation en conception et installation de réseaux électriques, Formation en conception de cartes électroniques
