Electronics & embedded systems engineer – seeking work‑study program

Réf. OB260303154505
18000 Bourges
https://www.ouvrierbtp.com/cv-candidat/260303154505/electronics-et-embedded-systems-engineer-seeking-workâ€-study-program Male Bourges Toute la France France 18000 Bourges

Je recherche tout type de contrat, dans toute la France, dans le Batiment.

09/2027 : Bac +5
Engineering Degree in Industrial Risk Management – Advanced Systems

09/2026 : Bac +5
Diplôme d'ingénieur en Électronique et Systèmes Embarqués

04/2026 - 09/2026 : Electronics Reliability Engineering Assistant chez Ascorel, Lyon
Developed a Python (PySide6) supervision application for an industrial weighing machine, integrated CAN communication, diagnosed sensor‑supervision sync faults, performed functional analysis and FMECA using the FIDES method.

02/2025 - 02/2025 : Secure LIDAR Tracking System on STM32 – Project chez Insa Centre Val De Loire, Bourges
Sized onboard power chain, designed power & control electronics, characterised measurement chain with VNA and validated dynamic behaviour via LTSpice/MATLAB.

05/2024 - 09/2024 : Assistant Engineer – Embedded Control Systems (Cruise Control) chez Lear Corporation, Rabat
Designed firmware architecture for a PIC16F818 in assembly, performed PCB design with MBSE, defined test and validation procedures complying with ISO 26262 safety requirements.

05/2023 - 09/2023 : Assistant Engineer – Reliability Study of an Electronic System chez Abb‑electrification, Tanger
Acquired and processed sensor signals on Raspberry Pi/ARM, wrote maintenance procedures for auxiliary equipment, calculated MTBF and failure‑rate indicators.

06/2022 - 09/2022 : Ingénieur assistant – Hardware & Régulation industrielle chez Redal, Rabat
Designed PCB for a circuit‑breaker control board, developed sequential logic (Grafcet) and low‑level drivers, integrated reliability analysis and failure‑rate modelling.

C, C++, Python, Rust, LADDER, R, Java, VBA, RTOS, VHDL, Verilog, Altium Designer, TIA Portal, LTSpice, AutoCAD, SysML (Modelio), ProteusVSM, SCADA, MATLAB, PSCAD, ETAP, Packet Tracer, GitLab, Power BI, Arduino, ESP32, Raspberry Pi, PIC 8/16, STM32, ARM, HAZOP, AMDEC, APR, Arbres de défaillance, Analyse fonctionnelle, Analyse de fiabilité (MTBF, R(t)), FIDES 2022, DOE, EN 50126 / EN 50128 / EN 50129, ISO 9001, IEC 62380 / IEC 61508, ISO 14001, ISO 45001, Formation en conception et installation de réseaux électriques, Formation en conception de cartes électroniques