|
L'emploi des ouvriers du BTP Tout corps d'état
Pour être rappelé, indiquez votre numéro de téléphone.
Contact
Réf. OB260914122539
75000 Paris
https://www.ouvrierbtp.com/cv-candidat/260914122539/embedded-system-engineer Female Paris Ile de France France 75000 Paris
75000 Paris
https://www.ouvrierbtp.com/cv-candidat/260914122539/embedded-system-engineer Female Paris Ile de France France 75000 Paris
Langues
English
French
French
Ma recherche
Je recherche tout type de contrat, sur toute la région Ile de France, dans le Batiment.
Formations
10/2022 : Bac +3
BS Electrical Engineer
BS Electrical Engineer
Bac +5
MS Embedded Systems
MS Embedded Systems
Expériences professionnelles
02/2025 - 01/2026 : Embedded System Engineer chez Beyond Tech, Islamabad
Optimized STM32 firmware reducing memory usage by 25 % and improving execution speed by 15 %. Developed embedded applications in C/C++ and Python for IoT and control systems. Implemented FreeRTOS tasks for sensor acquisition and motor control. Designed and tested 2‑layer PCBs, collaborated with hardware team for validation. Developed firmware for the Nordic nRF54L15 using C and Zephyr RTOS. Built, debugged and tested firmware using the Nordic SDK and Zephyr build system.
Optimized STM32 firmware reducing memory usage by 25 % and improving execution speed by 15 %. Developed embedded applications in C/C++ and Python for IoT and control systems. Implemented FreeRTOS tasks for sensor acquisition and motor control. Designed and tested 2‑layer PCBs, collaborated with hardware team for validation. Developed firmware for the Nordic nRF54L15 using C and Zephyr RTOS. Built, debugged and tested firmware using the Nordic SDK and Zephyr build system.
04/2023 - 07/2023 : Embedded Intern chez Epteck, Faisalabad
Developed embedded software modules for real‑time IoT data acquisition. Created technical documentation and participated in R&D / component analysis. Performed hardware debugging using oscilloscope, logic analyzer and SWD. Developed ESP32 firmware using ESP‑IDF for real‑time IoT applications, covering GPIO, UART, I²C and Wi‑Fi/BLE.
Developed embedded software modules for real‑time IoT data acquisition. Created technical documentation and participated in R&D / component analysis. Performed hardware debugging using oscilloscope, logic analyzer and SWD. Developed ESP32 firmware using ESP‑IDF for real‑time IoT applications, covering GPIO, UART, I²C and Wi‑Fi/BLE.
/ - : Smart Doorbell – Raspberry Pi Zero 2W (Project)
Python + Flask streaming system with camera, cloud logging and motion detection.
Python + Flask streaming system with camera, cloud logging and motion detection.
/ - : Motor Control Board – STM32F103 (Project)
2‑layer PCB with L298N, MPU6050, encoder feedback; implemented PID using C, I²C, PWM.
2‑layer PCB with L298N, MPU6050, encoder feedback; implemented PID using C, I²C, PWM.
/ - : Environmental Data Logger – STM32 + E‑Paper (Project)
7 ” E‑paper UI, real‑time logging of SCD30 and SPS30 sensors using FreeRTOS.
7 ” E‑paper UI, real‑time logging of SCD30 and SPS30 sensors using FreeRTOS.
Langues
English
French
French
Atouts et compétences
C Programming, Embedded C, C++, Python, Microcontrollers (STM32, ESP32, Nordic nRF54L15), Embedded Linux, FreeRTOS, Zephyr RTOS, FPGA, VHDL, Code Composer Studio, Git, Makefile / CMake, Hardware Debugging (oscilloscope, logic analyser, SWD), Algorithm design, System‑level problem solving, Hardware‑software integration, Autonomous vehicle concepts, Problem Solving, Analytical Thinking, Team Collaboration, Communication, Adaptability, Quick Learning, Time Management, Attention to Detail, Self‑Motivation
Obtenir les coordonnées de ce profil
